Maximizing Heat Tracing, Tank Heating & More Since 1954
Since 1954, Chemax Manufacturing Corporation's Tracit ("Trace-It") heat transfer cements have been considered essential for use in industrial applications where there is a need to transfer heat from one surface to another. This includes steam, fluid, and hot oil heat tracing systems where freeze protection and process temperature maintenance are critical concerns.
Heat transfer cement significantly boosts heat transfer rates between steam or electric tracers and process piping. Heat transfer cement works by eliminating the air cavities that exist between the tracer and process pipe. Heat is then transferred far more efficiently via means of conduction. Only one Tracit line is required to maintain pipe temperature where 3-5 bare tracers would normally be needed.
Chemax heat transfer compound is renowned for its workability, and is easily hand-troweled onto externally traced process pipes, valves, pumps, and industrial equipment. These self-curing compounds are non-corrosive and strongly bond to metal surfaces.
Overall costs are greatly reduced by eliminating the need for multiple tracers, steam traps, and steam supplies.
Non-hardening Tracit heat transfer mastic is applied to plate-type heating coils installed on tanks or vessels. The heat transfer mastic fills in the irregular surface areas of the plate coil, creating a thermal bond between the coil and tank wall. These waterproof compounds have an unlimited shelf life and can be easily removed.
Further reading: "Thermal Conducting Cements." John W. Kalis, Jr., P.E. Insulation Outlook Magazine